
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X290-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 290mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X290-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 290 mm stroke that can be dialed back by up to 20 mm, giving you a precise 270 to 290 mm usable travel window during commissioning. Delivering 345 N of pull force at 0.5 MPa, it handles lighter-duty positioning tasks reliably.
This model uses a carbon steel piston rod with an M10x1.25 thread, and its extruded aluminum barrel includes sensor grooves on both sides for direct mounting of CMSE or DMSE switches. The rear adjuster acts purely as a mechanical stop to set the retract end position, meaning it does not hold the load without live air pressure. For applications requiring true load-holding, consider the SAIL or BSAI series.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X290-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 290 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×290 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within the 270-290 mm window during initial commissioning without swapping out physical components.
Quickly adjust the end-stop to accommodate varying package lengths on a moving line, minimizing downtime between product runs.
Use the rear mechanical stopper to set precise lower-end limits for delicate positioning tasks that require slight travel trimming.
Choose this 32 mm bore when your application requires the 345 N pull force at 0.5 MPa; if you need more thrust, stepping up to the 40 mm bore yields 528 N. An adjustable-stroke cylinder is selected over a fixed SAI model when you need to fine-tune the end position at machine setup or accommodate minor product size changes without adding external stops. To replace this cylinder on an ISO 15552 machine, match the 32 mm bore, 290 mm stroke, 20 mm adjustment, PT tapered port thread, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because the stroke is 290 mm, the relatively long unsupported travel means an external guide should be used to prevent rod side-loading and premature wear.
Quick checklist
The maximum thrust is 82 kgf at 1.0 MPa.
The rear adjusting screw acts as a mechanical stop that lets you shorten the effective stroke by up to 20 mm. This creates a 270 to 290 mm adjustable travel window, allowing you to fine-tune the end position without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.