verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X290-20S

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X290-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 290mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke290 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$82.31 $89.81Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X290-20S

The AirTAC SAIJ32X290-20-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 270-290 mm usable travel window, letting you dial back the nominal 290 mm stroke by up to 20 mm during commissioning.

This variant features a carbon steel rod with an M10x1.25 thread, PT tapered ports sized G1/8, and an integrated magnet for CMSE reed and DMSE electronic sensors. The extruded aluminum barrel includes sensor grooves on both sides. Because the 290 mm stroke is relatively long for a 32 mm bore, you should use an external guide to prevent excessive side-loading on the rod.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X290-20S Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X290-20S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke290 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X290-20S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×290Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X290-20S Is Used

tune

Machine Changeover

Fine-tune the retract end-position by up to 20 mm during product size transitions without replacing the cylinder or adding external stops.

conveyor_belt

Variable End Stops

Dial in the exact 270 to 290 mm travel distance needed for pushing parts onto a moving belt at commissioning.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X290-20S the Right Cylinder?

Choose this 32 mm bore adjustable cylinder when your machine setup requires precise end-position tuning without swapping out physical components. Conversely, if you require a smaller footprint, the 32 mm bore is the baseline option in this ISO 15552 series.

The rear adjuster screw acts purely as a mechanical stop to fine-tune the retract distance; it does not lock or hold the load without continuous live air pressure. For load-holding requirements, consider the SAIL or BSAI series. When replacing an ISO 15552 cylinder, match the 32 mm bore, 290 mm stroke, 20 mm adjustment range, G1/8 PT ports, and the -S magnet option. The available mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X290-20S FAQ

The rear adjuster screw allows you to shorten the effective stroke by up to 20 mm, creating a usable travel window of 270 to 290 mm. It functions as a mechanical stop for end-position tuning and does not lock the load without live air pressure.

It can reach a maximum thrust of 82 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X290-20S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X290-20S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.