
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X290-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 290mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X290-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 250-290 mm usable travel window. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting.
A 40 mm adjustment range allows you to dial back the nominal 290 mm stroke without adding external stops. The PT G1/8 port and 12 mm carbon steel rod with an M10x1.25 thread handle standard side loads. Remember the rear screw acts as a travel stop, not a lock, so live air is required to maintain position.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X290-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 290 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×290 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 250-290 mm end-stop rapidly during product size transitions without physically replacing the cylinder.
Dial in the exact 40 mm retraction window during initial setup to compensate for mechanical tolerances.
Choose this 32 mm bore when 402N (0.5 MPa) is sufficient, or step up to the 40 mm bore for 628N if your payload increases. An adjustable stroke is ideal for machine setup and product changeover, fine-tuning the end position without swapping a fixed-stroke SAI cylinder. For strokes of 290 mm or more, use an external guide rail to prevent rod binding.
This model uses a PT tapered G1/8 port, carbon steel rod, and no magnet. It supports the SAIJ mounting subset (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR. If you need true load-holding without air pressure, select a SAIL or BSAI cylinder instead of relying on the adjuster.
Quick checklist
It can deliver up to 724N at 0.9 MPa.
The rear adjuster screw lets you shorten the 290 mm nominal stroke by up to 40 mm, creating a usable travel window of 250-290 mm. It acts as a mechanical stop and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.