
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X290-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 290mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X290-40-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 290 mm stroke that can be dialed back by up to 40 mm, yielding a usable travel window of 250 to 290 mm for precise end-position tuning at commissioning.
This variant includes a standard carbon steel rod and a -S magnet for compatibility with AirTAC CMSE reed and DMSE electronic sensors. The extruded aluminum barrel incorporates sensor grooves on both sides for flexible switch mounting. It uses a G1/8 PT tapered port and relies on variable air cushions at both ends to decelerate the load smoothly.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X290-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 290 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×290 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 250-290 mm travel window during product size transitions without physically replacing the cylinder or adding external mechanical stops.
Dial in the exact retract end position during commissioning to perfectly seat parts, using the rear stopper to absorb final approach variations.
The adjustable stroke is ideal for machine setups requiring variable end stops during product changeovers, preventing the need to physically swap out a fixed-stroke SAI cylinder. Because the stroke is 290 mm, ensure you use an external guide to support the 12 mm rod and prevent excessive side-load wear.
When specifying an ISO 15552 replacement, match the 32 mm bore, 290 mm nominal stroke, 40 mm adjustment range, G1/8 PT port, and the -S magnet. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting FB, CA, CB, and CR. Remember that the rear adjuster acts as a travel stop and the air cushions manage deceleration, but neither will hold a load without live air pressure; for true load-holding, consider the SAIL or BSAI series.
Quick checklist
The cylinder has a 290 mm nominal stroke with a 40 mm rear adjuster, allowing you to set the effective travel anywhere between 250 mm and 290 mm without altering the cylinder mounting.
No, the rear adjuster is a mechanical stop that sets the travel end, and the air cushions only manage deceleration. Neither acts as a lock or brake, so the cylinder cannot hold a load without live air pressure. For load-holding, use an external rod lock or the AirTAC SAIL/BSAI series.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.