
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X290-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 290mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X290-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel down from the 290mm nominal stroke, creating a usable 215-290mm window.
Equipped with a 12mm carbon steel rod and M10x1.25 threading, this variant utilizes a PT tapered port thread and lacks a standard magnet for sensors. The rear adjustment mechanism acts purely as a travel stop to decelerate the end-of-stroke position, meaning it cannot hold a load dynamically without continuous live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X290-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 290 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×290 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 215 to 290mm travel distance during initial setup to perfectly align tooling without machining custom spacers.
Quickly adapt the end-stop position on a packaging line when switching between different product sizes, minimizing downtime.
An adjustable stroke is highly beneficial during machine commissioning or product changeovers, allowing you to set variable end-stops on the fly without physically swapping out the cylinder or adding external stopper blocks.
Because the 290mm stroke is relatively long for a 32mm bore, an external guide is recommended to prevent excessive rod side-loading and premature seal wear. This cylinder uses a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options. For applications requiring true load-holding without live air pressure, consider the SAIL or BSAI series instead.
Quick checklist
The nominal stroke is 290mm, but the rear adjuster allows you to shorten the effective travel by up to 75mm, resulting in a usable stroke window of 215 to 290mm.
No, the rear adjuster functions only as a travel stop and cannot hold a load. The SAIJ requires live air pressure to maintain position; for true load-holding, look at the SAIL or BSAI series.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.