
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X290-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 290mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X290-75-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, enabling you to dial back the nominal 290 mm travel by up to 75 mm. This creates a precise 215-290 mm usable window for fine end-position tuning at commissioning without swapping hardware.
Featuring a 12 mm carbon steel rod and M10x1.25 thread, this unit supports standard side loads, though the 290 mm length still benefits from an external guide for heavy radial forces. The extruded aluminum barrel includes sensor grooves on both sides, and the mounting set covers Basic, FA, LB, TC, FTC, TCM1, and TCM2 options. The rear adjuster acts purely as a travel stop, so it will not hold a load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X290-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 290 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×290 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial the end-stop back from 290 mm to 215 mm during product size transitions without changing the cylinder.
The integrated -S magnet works seamlessly with CMSE reed and DMSE solid-state switches in the dual barrel grooves.
Fine-tune the exact retract position during setup to avoid adding external mechanical stops to the fixture.
The adjustable stroke is selected over a fixed SAI when a machine requires variable end-stops or frequent product-size changeovers, allowing you to trim the 290 mm stroke back to 215 mm via the rear screw. For load-holding without live pressure, this cylinder cannot act as a lock; you would need an external rod lock or the SAIL/BSAI series. To replace an ISO 15552 unit, match the 32 mm bore, 290 mm stroke, 75 mm adjustment, PT tapered port, and -S magnet.
Quick checklist
At the maximum 1.0 MPa operating pressure, it delivers 82 kgf.
The rear adjuster screw lets you shorten the 290 mm nominal stroke by up to 75 mm, creating a usable travel window of 215 to 290 mm for exact end-position tuning.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.