
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X30-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 30mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X30-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 30 mm stroke that can be fine-tuned down by up to 10 mm, creating a precise 20-30 mm usable travel window.
This variant includes a magnet for position sensing and uses a PT tapered port thread. The rear adjuster acts strictly as a mechanical stop to set the retract end position during commissioning; it does not lock the load without continuous air pressure. For load-holding requirements, an external pilot-operated check valve or a SAIL lock cylinder is required.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X30-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 20-30 mm retract distance during machine commissioning to perfectly align small parts without adding external shims.
Quickly adjust the end-stop by up to 10 mm when switching between slightly different product sizes on a high-mix assembly line.
Choose this 32 mm bore adjustable-stroke cylinder when you need to dial in a precise end-of-stroke position on the fly without swapping out physical components. Conversely, if the 20-30 mm travel window is too tight, a larger adjustment code provides a wider tuning range.
As an ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 cylinders and supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). The integrated magnet works seamlessly with AirTAC CMSE reed and DMSE electronic solid-state sensors. The 12 mm carbon steel rod and M10x1.25 thread handle moderate side loads well, though external guiding is recommended for any off-axis forces.
Quick checklist
The rear adjuster allows you to shorten the nominal 30 mm stroke by up to 10 mm, providing a usable travel window of 20-30 mm. This mechanical stop fine-tunes the retract end position at commissioning but does not hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.