
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X30-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 30mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X30-20 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the 30 mm nominal stroke by up to 20 mm to achieve a precise 10-30 mm usable travel window. The extruded aluminum barrel features sensor grooves on both sides, ready to accept CMSE reed or DMSE electronic switches if a magnet is added later.
Instead of machining custom external stops for short-stroke tasks, the integrated rear screw lets you fine-tune the retract position directly at commissioning. This adjuster functions strictly as a travel stop paired with variable air cushions at both ends to decelerate the load, meaning it will not hold a position without live air pressure. For load-holding requirements, an external rod lock or a SAIL pneumatic locking cylinder is required.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X30-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 10-30 mm travel needed for delicate clamping or sensor triggering without swapping cylinders or adding external stopper blocks.
Quickly adjust the retract end-position by up to 20 mm when switching between slightly different product sizes on a packaging line.
Use the fine rear screw adjustment to set precise pressing depths for small component insertion tasks at 0.5 MPa operating pressure.
Selecting the SAIJ32X30-20 makes sense when your machine setup requires variable end-stops or frequent product-size changeovers within a very compact 10-30 mm travel range. Because the stroke is short, side-loading is minimal, but always ensure the M10x1.25 rod thread is axially aligned to prevent binding.
As a dimensionally interchangeable ISO 15552 profile cylinder, it uses a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR brackets. To match this exact replacement, specify the 32 mm bore, 30 mm stroke, 20 mm adjustment range, PT port thread, carbon steel rod, and no magnet.
Quick checklist
The rear adjuster screw acts as a mechanical stop that can trim the effective travel back by up to 20 mm, giving you a usable stroke window of 10 to 30 mm. It only sets the end position and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.