verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X30-20S

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X30-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 30mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke30 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$61.63 $69.13Save 10% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X30-20S

The AirTAC SAIJ32X30-20-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The built-in rear stopper allows you to trim the 30mm nominal stroke back by up to 20mm, creating a precise 10-30mm usable travel window for exacting setup requirements.

This adjustable-stroke design eliminates the need to swap cylinders or bolt on external stops during product changeovers. It uses a PT tapered port thread and includes an extruded aluminum barrel with sensor grooves on both sides for flexible CMSE or DMSE switch mounting. The adjuster acts purely as a travel stop to set the end position, meaning it will not hold the load without live air pressure.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X30-20S Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X30-20S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke30 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X30-20S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×30Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X30-20S Is Used

tune

Precision Component Seating

Dial in the exact 10-30mm travel window during machine commissioning to seat delicate electronic components without crushing them.

settings_input_component

Rapid Product Changeover

Quickly adjust the rear stopper to accommodate varying part sizes on a packaging line, avoiding the downtime of swapping out entire cylinders.

precision_manufacturing

Variable End-Stop Machining

Fine-tune the retract position on a small pneumatic clamp, using the rear screw to set precise material engagement depths on the fly.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X30-20S the Right Cylinder?

An adjustable stroke is preferred over a fixed SAI cylinder when you need on-the-fly commissioning adjustments or variable end-stops without changing the physical mounting.

To match this ISO 15552 interchangeable cylinder for a replacement, verify the 32mm bore, 30mm stroke, 20mm adjustment range, PT port thread, and the -S magnet option. Standard mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2. If the machine requires the load to be held mechanically without continuous air pressure, you must use an external rod lock or switch to a SAIL or BSAI series cylinder, as the SAIJ adjuster is not a locking device.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X30-20S FAQ

The rear adjuster acts as a mechanical stop that lets you shorten the 30mm nominal stroke by up to 20mm, providing a usable travel window of 10-30mm. It sets the end position but does not lock the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X30-20S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X30-20S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.