
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X30-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 30mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X30-30 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 30 mm stroke that can be dialed back by up to 30 mm, giving you a 0-30 mm usable travel window for precise end-position tuning at commissioning.
This adjustable design eliminates the need to swap cylinders or add external stops when fine-tuning machine timing. It uses a PT tapered port thread and includes variable air cushions at both ends to decelerate the load. The rear adjustment screw acts as a travel stop, not a lock, so it cannot hold a load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X30-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 0-30 mm end-position during commissioning without physically swapping out the cylinder for a different stroke length.
Quickly adjust the travel window on packaging lines when switching between slightly different product sizes that require varying stroke ends.
Use the rear stopper to fine-tune the retract stroke on small pneumatic clamps and pick-and-place mechanisms requiring precise positioning.
Choose this 32 mm bore when your application requires 345 N of pull force at 0.5 MPa and a very short, highly adjustable stroke. If you need more thrust, stepping up to the 40 mm bore provides 528 N of pull force at the same pressure. The SAIJ32X30-30 is ideal when you need variable end-stops for product changeovers rather than a fixed-stroke SAI cylinder. To match this ISO 15552 replacement exactly, specify the 32 mm bore, 30 mm stroke, 30 mm adjustment, PT port, carbon steel rod, and no magnet. Since the stroke is under 300 mm, side-load risks are minimal, but external guides are still recommended for heavy lateral loads. For applications requiring the load to stay in place without continuous air pressure, consider the SAIL or BSAI series instead.
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 82 kgf.
The rear adjuster screw allows you to shorten the effective travel from the 30 mm nominal stroke down to 0 mm, creating a 0-30 mm usable window. The adjuster acts as a mechanical stop to set the retract end-position and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.