verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X30-30S

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X30-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 30mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke30 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$61.63 $69.13Save 10% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X30-30S

The AirTAC SAIJ32X30-30-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. Because this specific SKU carries a 30 mm adjustment code on a 30 mm nominal stroke, it provides a highly versatile 0 to 30 mm usable travel window. This allows operators to completely dial back the extension distance without swapping hardware.

The extruded aluminum barrel includes sensor grooves on both sides, and the integrated -S magnet enables precise end-position detection using AirTAC CMSE reed or DMSE electronic solid-state switches. The rear stopper screw acts purely as a travel end-stop for fine-tuning at commissioning; it does not lock or hold the load without continuous live air pressure. For applications requiring position holding, a SAIL or BSAI variant would be required.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X30-30S Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X30-30S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke30 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X30-30S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×30Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X30-30S Is Used

tune

Product Changeovers

Quickly dial in the 0-30 mm travel window during format changes on packaging lines without physically replacing the cylinder.

precision_manufacturing

Exact End-Positioning

Fine-tune the final extension point at machine commissioning to ensure delicate parts are contacted without crushing.

settings_input_component

Variable Stops

Replace rigid external stop blocks with the built-in rear adjuster for cleaner machine design and simplified maintenance.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X30-30S the Right Cylinder?

If the setup needs slightly more thrust, stepping up to the 40 mm bore increases push force to 628 N. The adjustable stroke is ideal for machines running multiple product sizes, allowing the extension to be trimmed back on the fly instead of adding external stops. When specifying an ISO 15552 replacement, match the 30 mm stroke, 30 mm adjustment range, PT G1/8 port, and the -S magnet requirement.

Mounting options for this series are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR brackets. The 12 mm rod and M10x1.25 thread provide adequate stiffness for short 30 mm travels, though any significantly longer extension would still require an external guide to prevent side-loading.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X30-30S FAQ

The rear adjuster screw lets you shorten the effective stroke by up to 30 mm. Since the nominal stroke is 30 mm, this provides a usable travel window of 0 to 30 mm, allowing you to set the exact extension distance without changing the cylinder.

At the maximum 1.0 MPa pressure, the push force reaches 804 N.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X30-30S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X30-30S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.