
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X300-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 300mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X300-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to dial back the travel by up to 10 mm. This creates a precise 290-300 mm usable window, letting you fine-tune the retract end position at commissioning without adding external stops.
Equipped with a 12 mm carbon steel rod and an M10x1.25 thread, this unit handles light-to-medium loads while operating at speeds of 30-800 mm/s. It features a PT tapered port connection and variable air cushions at both ends to manage deceleration. The extruded aluminum barrel includes sensor grooves on both sides for mounting CMSE reed or DMSE electronic switches.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X300-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 290-300 mm retract position during machine commissioning to align stops perfectly without machining new components.
Quickly adjust the end-stop by up to 10 mm on packaging lines when switching to a slightly different product size.
The rear adjuster acts purely as a travel stop for end-position tuning, not a lock; a plain SAIJ will not hold a load without live air. For true fail-safe load holding, consider the SAIL or BSAI series.
Because this model features a 300 mm stroke, the extended travel can amplify side-loading on the 12 mm rod. An external guide mechanism is recommended to prevent rod binding and premature seal wear over long movements. This cylinder uses a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets.
Quick checklist
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster screw acts as a mechanical stop that shortens the 300 mm nominal stroke by up to 10 mm, giving a usable 290-300 mm travel window. It sets the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.