
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X300-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 300mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X300-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 300 mm stroke with an adjustable travel window of 200-300 mm, allowing you to dial back the extend position by up to 100 mm during commissioning. The carbon steel piston rod has an M10x1.25 thread, and the body uses a PT tapered port (G1/8) for pneumatic connections.
This extruded aluminum profile barrel includes sensor grooves on both sides for mounting CMSE reed or DMSE electronic switches. It carries the reduced SAIJ mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets. The rear adjuster acts purely as a mechanical stop to set the travel end and deceleration alongside the built-in air cushions; it does not hold the load without live air pressure, so applications requiring true position holding need a SAIL or BSAI variant.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X300-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end-stop distance from 200 to 300 mm during product size changeovers without physically swapping the cylinder or reworking the fixture.
Adjust the retract position on the fly to handle different package sizes on a conveyor line, using the rear screw to fine-tune the diverter arm reach.
Trim the effective stroke up to 100 mm during initial machine commissioning to perfect the timing and reach of a pick-and-place assembly without changing hardware.
Choose this 32 mm bore when you need precise end-position tuning on a 300 mm stroke without swapping cylinders or adding external stops. The 100 mm adjustment range is particularly useful for product changeovers on a line where the end-stop distance varies significantly. When replacing an ISO 15552 cylinder, match the 32 mm bore, 300 mm stroke, PT port, and mounting bracket. Because the stroke is 300 mm, the 12 mm rod can experience side-load deflection; always use an external guide to support the load and prevent premature seal wear. For load-holding without continuous air pressure, select a SAIL (air-released lock) or BSAI (clamp-lock) cylinder instead of relying on the adjuster.
Quick checklist
At the maximum rated pressure of 1.0 MPa, it can deliver up to 82 kgf of thrust.
The rear adjusting screw acts as a mechanical stopper that lets you shorten the effective 300 mm stroke by up to 100 mm, creating a usable travel window of 200-300 mm. It sets the end position and works with the air cushions to decelerate the load, but it does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.