
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X300-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 300mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X300-20 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 280 to 300 mm, letting you dial back the nominal stroke by up to 20 mm during commissioning. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement.
This model uses a 12 mm carbon steel rod with an M10x1.25 thread, paired with PT tapered G1/8 ports. It offers variable air cushions at both ends to manage end-of-stroke impact. The rear adjuster acts purely as a travel stop to set deceleration, so it will not hold a load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X300-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the retraction point within a 280 to 300 mm window to accommodate slight mechanical variations without machining new hard stops.
Quickly adjust the stroke by up to 20 mm during product size transitions on a conveyor line, minimizing downtime between batches.
Choose this 32 mm bore when you need precise end-position tuning without swapping cylinders or adding external stops. Conversely, if you need less force, you can step down to a smaller profile. Because the stroke is 300 mm, the 12 mm rod needs an external guide to prevent excessive side-load wear on the seals.
The adjustable rear screw is ideal for product changeovers on a line, letting you shift the end stop by up to 20 mm on the fly. For load-holding without continuous air pressure, this plain SAIJ is insufficient; you should look at the SAIL or BSAI series instead. To match this ISO 15552 replacement exactly, confirm the 300 mm stroke, 20 mm adjustment, PT G1/8 port, and your required mounting option from the SAIJ set: Basic, FA, LB, TC, FTC, TCM1, or TCM2.
Quick checklist
At 0.7 MPa, the push force increases to 563 N. The maximum operating pressure is 1.0 MPa.
A rear external screw acts as a stopper, allowing you to shorten the effective stroke from 300 mm down to 280 mm. This adjuster only sets the travel end and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.