
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X300-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 300mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X300-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 270 to 300 mm, allowing you to dial in the exact retract position without adding external stops.
This model uses a 12 mm carbon steel rod with an M10x1.25 thread, and relies on a 27 mm variable air cushion at both ends to manage deceleration. The extruded aluminum barrel includes sensor grooves on both sides for flexible positioning switch placement. Note that the rear adjuster functions strictly as a travel stop to set the end position, not as a lock to hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X300-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 270-300 mm travel window during product size transitions to set new retract stops rapidly without changing the cylinder.
Fine-tune the exact retraction point during machine commissioning using the rear screw, avoiding the need to bolt on external physical stops.
Choose this adjustable-stroke SAIJ model when your application requires fine end-position tuning during commissioning or product changeover, avoiding the need to swap out a fixed-stroke SAI cylinder. The configuration for this ISO 15552 interchangeable unit includes a 32 mm bore, 300 mm stroke, 30 mm adjustment range, PT tapered port thread, and standard carbon steel rod material without a magnet.
Because the nominal stroke is 300 mm, the 12 mm rod becomes increasingly susceptible to side-loading deflection over extended travels. Even with the integrated 27 mm air cushions, you should support the load with an external guide rail to prevent premature seal wear and binding. For applications that require true load-holding without continuous air pressure, consider the SAIL pneumatic lock or BSAI clamp-lock cylinder series instead of relying on the adjuster.
Quick checklist
The rear adjuster acts as a mechanical stop that lets you shorten the effective stroke by up to 30 mm. This creates a 270 to 300 mm usable travel window for fine-tuning the end position at commissioning without swapping the cylinder.
At 0.7 MPa, the push force increases to 563 N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.