
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X300-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 300mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X300-40 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 40 mm adjustment range, allowing you to fine-tune the effective travel down from the 300 mm nominal stroke to a 260-300 mm usable window.
Instead of machining external stops or swapping cylinders during a product changeover, you simply turn the rear screw to set the exact retract position. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE or DMSE switches. Remember that the rear adjuster acts only as a travel stop; it does not hold the load dynamically without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X300-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 260-300 mm retract position during commissioning without adding external mechanical stops to the machine frame.
Quickly adjust the stroke end-position by up to 40 mm when a production line switches to a different sized package or part.
Choose this 32 mm bore adjustable cylinder when your machine setup requires variable end-stops rather than a fixed 300 mm stroke. If your application demands greater thrust, stepping up to the 40 mm bore increases the 0.5 MPa push force to 628 N. Because this unit features a 300 mm stroke, the 12 mm carbon steel rod and M10x1.25 thread will carry some side load, but an external guide is recommended for long unsupported loads to prevent premature wear.
This SAIJ32X300-40 is dimensionally interchangeable with ISO 15552 cylinders. It uses a PT tapered G1/8 port, lacks a magnet for sensors, and supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). For applications requiring the load to be held without continuous air pressure, consider the SAIL or BSAI series instead of relying on the adjuster.
Quick checklist
At 0.9 MPa, the push force increases to 724 N.
The rear adjuster screw lets you shorten the effective travel from the 300 mm nominal stroke down to 260 mm, creating a 260-300 mm usable window. It functions purely as a mechanical stop and does not lock or hold the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.