
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X300-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 300mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X300-40-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the nominal 300 mm travel by up to 40 mm for a precise 260-300 mm usable window.
This bore size features a 12 mm carbon steel rod with an M10x1.25 thread, a PT tapered port, and 27 mm variable air cushions at both ends. The rear stopper lets you fine-tune the retract position during commissioning or product changeovers without swapping hardware, though it acts only as a travel stop and does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X300-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly adjust the retract end-stop by up to 40 mm when switching between product sizes on a packaging line, avoiding cylinder swaps.
Fine-tune the 300 mm travel window during commissioning to dial in exact positioning without machining external stopper blocks.
Set precise retraction limits for sorting pushes on a conveyor, using the rear screw to adapt the stroke for varying package depths.
Choose this 32 mm bore when an application requires exact end-position tuning within a 260-300 mm travel band, rather than fitting a fixed-stroke SAI cylinder or adding external stops. If your setup needs more thrust, stepping up to the 40 mm bore increases push force to 628 N at 0.5 MPa. Because the 300 mm stroke is relatively long for a 32 mm bore, an external guide is recommended to prevent excessive side-loading on the 12 mm rod.
For a true ISO 15552 replacement match, verify the 300 mm stroke, 40 mm adjustment range, PT port thread, and the required mounting style from the SAIJ subset: Basic, FA, LB, TC, FTC, TCM1, or TCM2. The integrated magnet works directly with AirTAC CMSE reed and DMSE electronic sensors. If the machine requires the load to be held without continuous air pressure, select a SAIL locking cylinder or an external rod lock instead of relying on the rear adjuster.
Quick checklist
The maximum thrust is 82 kgf at 1.0 MPa.
The rear adjuster acts as a mechanical stop that lets you shorten the 300 mm nominal stroke by up to 40 mm, creating a 260-300 mm usable travel window. It only sets the end position and does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.