
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X300-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 300mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X300-75-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. By turning the rear stopper screw, you can trim the 300mm nominal stroke back by up to 75mm, creating a precise 225-300mm usable travel window for exact end-position tuning during commissioning.
This adjustable design eliminates the need to physically swap cylinders or bolt on external stops when accommodating minor product size changes on a line. The extruded aluminum barrel includes sensor grooves on both sides, and because this SKU includes a magnet (-S), it directly supports AirTAC CMSE reed and DMSE electronic solid-state switches for position feedback. The rear adjuster functions purely as a travel stop to set deceleration, meaning it will not hold a load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X300-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 225-300mm travel distance during machine setup without replacing the entire cylinder or adding external mechanical stops.
Quickly adjust the retract distance on a packaging line to accommodate varying material lengths or package sizes on the fly.
Fine-tune the final end-position during initial equipment commissioning to perfect timing and prevent mechanical crashes.
If you need to hold a position securely without continuous live air, this adjustable stopper is not a lock; you would instead need to specify a SAIL pneumatic lock, a BSAI clamp-lock cylinder, or an external rod lock. Because the 300mm stroke is relatively long for a 12mm rod, an external guide rail is recommended to prevent excessive side-load wear on the rod seals. This SAIJ model uses the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR brackets, and is dimensionally interchangeable per ISO 15552.
Quick checklist
The operational speed range for this 32mm bore is 30-800 mm/s.
The rear adjuster screw acts as a mechanical stop that lets you shorten the 300mm nominal stroke by up to 75mm, providing a usable travel window of 225-300mm. It sets the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.