
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X325-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 325mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X325-10 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 325 mm stroke with a 10 mm adjustment range, yielding a precise 315-325 mm usable travel window for fine-tuning the retract end position at commissioning.
This extruded aluminum profile cylinder includes variable air cushions at both ends to decelerate the load smoothly. The rear adjuster acts strictly as a mechanical stop to set the end position and does not hold the load without live air pressure. For position holding without continuous air, a SAIL or BSAI variant would be required.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X325-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 325 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×325 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 315-325 mm retract position during product size changes without fabricating new spacer blocks or replacing the entire cylinder.
Fine-tune the final resting position of a tooling plate during commissioning to achieve exact alignment, absorbing minor mechanical tolerances.
Adjust the stroke length on a lightweight diverter arm to handle different package sizes on the fly, ensuring precise routing without retooling.
The adjustable stroke is ideal for product changeovers on a line where a fixed SAI cylinder would require manual shimming.
Because the 325 mm stroke is relatively long for a 32 mm bore, the 12 mm carbon steel rod is susceptible to side-loading and buckling; an external guide rail is recommended to support the load. This model uses PT tapered port threads, omits a magnet for sensors, and is dimensionally interchangeable per ISO 15552. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
The rear adjuster screw allows you to shorten the effective stroke by up to 10 mm, creating a 315-325 mm usable travel window. It functions as a mechanical stop to set the end position and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.