
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X325-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 325mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X325-100 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 325 mm stroke that can be dialed back by up to 100 mm, giving you a usable travel window of 225-325 mm for precise end-position tuning.
This adjustable design eliminates the need to swap cylinders or bolt on external stops during product changeovers. The extruded aluminum barrel features sensor grooves on both sides for flexible switch mounting, and the mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Because the stroke is 325 mm, an external guide is recommended to prevent excessive side-loading on the 12 mm rod.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X325-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 325 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×325 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end-stop from 225 to 325 mm during product size changes without replacing the cylinder or adding shims.
Fine-tune the retract position of a sorting gate on a conveyor line to handle varying package lengths on the fly.
Trim the stroke by up to 100 mm during commissioning to perfect the seating force of a light-duty clamping mechanism.
The rear adjuster acts purely as a mechanical stop to fine-tune the retract position at commissioning; it does not hold the load without live air. For load-holding requirements without continuous air pressure, consider an external rod lock or the AirTAC SAIL/BSAI series.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 325 mm nominal stroke, 100 mm adjustment range, PT tapered port thread, and standard carbon steel rod. This model operates without a magnet, so position sensing via CMSE or DMSE switches is not supported unless a -S variant is specified. The standard mounting set omits FB, CA, CB, and CR brackets, so verify your mounting interface fits the available SAIJ options.
Quick checklist
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster screw allows you to shorten the effective stroke by up to 100 mm, creating a usable travel window of 225-325 mm from the 325 mm nominal stroke. It functions as a mechanical stop and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.