
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X325-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 325mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X325-20 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. By turning the external stopper screw, you can trim the effective travel back by up to 20 mm, creating a precise 305-325 mm usable window for exact end-position tuning.
Because the nominal 325 mm stroke is relatively long for this 32 mm bore, the 12 mm rod and M10x1.25 thread should be paired with an external guide to handle potential side loads. The extruded aluminum barrel includes sensor grooves on both sides, ready for CMSE or DMSE switches if a magnet is added later. This adjustable variant uses the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting the FB, CA, CB, and CR brackets.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X325-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 325 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×325 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 305-325 mm travel window during product size transitions without physically replacing the cylinder or reworking external hard stops.
Fine-tune the exact retract distance at commissioning to compensate for mechanical wear or sensor placement variations.
Adjust the stroke on the fly for conveyor sorting arms that need to accommodate different package depths on the same line.
If you need less force, dropping to a smaller bore changes the footprint, while stepping up to a 40 mm bore yields 628 N. The integrated 20 mm adjustment mechanism lets you fine-tune the retract end position during commissioning or product changeovers without swapping the cylinder or adding external stops. Remember that the rear adjuster acts only as a travel stop; it does not hold the load without live air. For true load-holding without pressure, consider an AirTAC SAIL, BSAI, or an external rod lock.
Quick checklist
The rear adjuster screw lets you shorten the 325 mm nominal stroke by up to 20 mm, providing a usable travel window of 305-325 mm. It acts as a mechanical stop to set the end position, but it is not a lock and will not hold the load without continuous air pressure.
At 0.7 MPa, the push force increases to 563 N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.