
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X325-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 325mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X325-30 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. By integrating an external adjustment screw, this model provides a usable travel window of 295-325mm, letting you shorten the effective 325mm stroke by up to 30mm without changing the cylinder or adding external stops.
Designed for precision commissioning, the rear stopper acts purely as a travel end deceleration point, not a lock, so it will not hold the load without live air. The extruded aluminum barrel includes sensor grooves on both sides, and the unit omits FB, CA, CB, and CR mounts, offering a focused set of Basic, FA, LB, TC, FTC, TCM1, and TCM2 interfaces.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X325-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 325 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×325 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 295-325mm end position during machine commissioning to accommodate varying product sizes without installing physical shims.
Quickly adjust the retract distance on a packaging line when switching to a different carton length, minimizing downtime between production runs.
Fine-tune the stroke during initial equipment setup to ensure precise positioning, using the rear screw to dial out mechanical slack.
The adjustable stroke is ideal for machine setup and product changeover, allowing you to fine-tune the end position on the fly instead of swapping a fixed-stroke SAI cylinder.
Because the 325mm stroke is relatively long for a 32mm bore, the 12mm rod and M10x1.25 thread will carry less side load, so an external guide is recommended to prevent rod binding. For load-holding without live pressure, this plain cylinder is insufficient; you should look to the SAIL or BSAI series, or use an external pilot-operated check valve. Replacement matches require a 32mm bore, 325mm stroke, -30mm adjust, PT tapered port, and the specified mounting set.
Quick checklist
At the maximum 1.0MPa pressure, it delivers up to 82kgf.
The rear adjuster screw allows you to shorten the nominal 325mm stroke by up to 30mm, creating a usable travel window of 295-325mm. The adjuster acts as a travel stop to set the end position and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.