
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X325-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 325mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
Its integrated -S magnet enables position sensing with AirTAC CMSE reed and DMSE electronic switches. The extruded aluminum barrel features sensor grooves on both sides for flexible switch placement.
With a 325mm nominal stroke and a 30mm adjustment range, this model provides a usable travel window of 295-325mm. This allows you to fine-tune the retract end position at commissioning without adding external stops. The carbon steel piston rod features an M10x1.25 thread, and the PT tapered port ensures a secure pneumatic connection.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X325-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 325 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×325 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 295-325mm travel window during product size changes without swapping the cylinder or repositioning hard stops.
Fine-tune the retract position of a sorting deflector on the fly to accommodate varying package lengths on a packaging line.
Trim the final 30mm of stroke during initial machine setup to achieve exact sensor triggering and avoid mechanical collisions.
Choose this 32mm bore when an application requires precise end-position tuning within a 295-325mm travel window. Because the 325mm stroke is relatively long for a 32mm rod, external guiding is recommended to prevent excessive side-loading and premature seal wear.
The rear adjuster acts strictly as a mechanical stop to set the travel limit, not as a locking device; it cannot hold a load without continuous air pressure. For load-holding requirements without live pressure, consider the SAIL pneumatic lock or BSAI clamp-lock series. This cylinder uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and is dimensionally interchangeable per ISO 15552.
Quick checklist
At 0.7 MPa, the push force increases to 563N.
The rear adjuster screw lets you shorten the effective stroke by up to 30mm, creating a usable travel window of 295-325mm. It functions as a mechanical stop for end-position tuning and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.