
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X325-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 325mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X325-40 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 325 mm stroke that can be fine-tuned backward by up to 40 mm, creating a usable travel window of 285-325 mm.
This extruded aluminum profile cylinder includes sensor grooves on both sides for flexible switch mounting. Because the stroke extends past 300 mm, the 12 mm carbon steel rod and M10x1.25 thread should be paired with an external guide to manage side loads and prevent rod deflection.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X325-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 325 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×325 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 285-325 mm travel window during product size changes without swapping cylinders or adding external mechanical stops.
Fine-tune the retract end position at commissioning to perfect the physical placement of light-duty 402 N tooling.
Adjust the stroke dynamically on a packaging line to push varying box sizes accurately without reprogramming controls.
Choose this 32 mm bore when a compact ISO 15552 footprint is required but precise end-stop tuning is necessary at commissioning. The SAIJ32X325-40 uses a PT tapered port thread and supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2.
The rear adjuster acts strictly as a travel stop for end-position tuning, not as a locking device. It cannot hold a load without continuous live air pressure. For true load-holding without air, consider an external rod lock, a pilot-operated check valve, or AirTAC SAIL and BSAI cylinder variants.
Quick checklist
It features a rear adjusting screw that acts as a stopper, allowing you to shorten the effective stroke by up to 40 mm. This provides a usable travel window of 285-325 mm for fine-tuning the retract position at commissioning.
It operates at speeds between 30 and 800 mm/s.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.