
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X325-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 325mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X325-40-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 325 mm nominal stroke that can be fine-tuned backward by up to 40 mm, yielding a usable travel window of 285-325 mm. This built-in adjustability allows precise end-position tuning during commissioning without swapping hardware.
This model includes a magnetic piston (-S) for position detection, interfacing directly with AirTAC CMSE reed and DMSE electronic solid-state sensors housed in the dual-side sensor grooves of its extruded aluminum barrel. The rear adjuster acts strictly as a mechanical stop for end-position tuning and deceleration setup, not as a locking mechanism. For applications requiring true load-holding without live air pressure, consider the SAIL or BSAI variants.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X325-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 325 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×325 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 285-325 mm stroke window on packaging lines to accommodate varying carton sizes without physically replacing the cylinder or adding external stopper blocks.
Fine-tune the retract end-position during machine commissioning to perfectly align tooling, absorbing mechanical tolerances using the 40 mm rear adjustment screw.
Leverage the magnetic piston with DMSE electronic sensors to trigger diverter arms at precise intermediate positions within the adjustable travel window.
The adjustable stroke is ideal for machine setups requiring variable end-stops or product-size changeovers, offering flexibility that a fixed-stroke SAI cylinder cannot provide. To achieve a true ISO 15552 replacement match, confirm the 325 mm stroke, 40 mm adjustment range, PT port thread, and required mounting subset (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Because this cylinder features a 325 mm stroke on a 12 mm rod, the extended travel increases susceptibility to side-loading. Always use an external guide to support the load and prevent premature seal wear. Note that the rear adjuster and air cushions only manage travel ends; they do not hold the load safely without continuous air supply.
Quick checklist
It features a rear mechanical stopper that allows you to shorten the effective stroke by up to 40 mm. This creates an adjustable travel window from 285 mm to 325 mm, letting you set the exact end-position at commissioning without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.