
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X325-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 325mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X325-50 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. Its 325 mm nominal stroke can be dialed back by up to 50 mm, providing a usable travel window of 275 to 325 mm for precise end-position tuning.
This model uses a PT tapered G1/8 port and operates at speeds between 30 and 800 mm/s. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE or DMSE switches. The rear adjuster acts purely as a mechanical stop to fine-tune the retract position during commissioning or product changeovers without requiring external stops.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X325-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 325 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×325 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance between 275 and 325 mm during machine commissioning to perfect product placement without machining custom spacers.
Quickly adapt a production line to different package lengths by turning the rear adjuster screw, reducing downtime between product runs.
Trim the effective stroke by up to 50 mm to compensate for mechanical wear or slight misalignments in the fixture without replacing the cylinder.
The SAIJ32X325-50 is selected over a fixed-stroke SAI cylinder when a variable end-stop is needed to accommodate multiple product sizes on a single machine.
Because this cylinder features a 325 mm stroke, the unsupported rod extension requires attention. Although the 12 mm rod with its M10x1.25 thread handles standard loads well, long unsupported strokes are susceptible to side-loading; an external guide rail is recommended to prevent premature seal wear. This plain SAIJ cylinder does not hold its load without live air pressure, as the rear adjuster is a travel stop, not a locking device. For fail-safe load holding, consider the SAIL or BSAI series. To replace an ISO 15552 cylinder, match the 32 mm bore, 325 mm stroke, 50 mm adjustment, PT G1/8 port, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Quick checklist
At the maximum pressure of 1.0 MPa, it delivers up to 82 kgf.
The rear adjuster screw acts as a mechanical stop that shortens the retract stroke. For this model, it allows you to trim the effective travel anywhere within a 275 to 325 mm window. It only sets the end position and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.