
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X325-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 325mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X325-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a usable travel window of 250-325 mm.
The rear adjuster screw acts purely as a travel stop for deceleration, not a lock, meaning it cannot hold a load without live air pressure. This version uses a carbon steel rod and PT tapered ports, omitting the FB, CA, CB, and CR mounting options found on some standard variants.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X325-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 325 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×325 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 250-325 mm travel window during product size changes without physically swapping cylinders or adding external stopper blocks.
Fine-tune the retract end position at commissioning to absorb mechanical tolerances, using the rear screw to set the exact 325 mm travel limit.
If your project demands less force, dropping to a 20 mm bore yields 188 N, while stepping up to a 40 mm bore provides 628 N. The adjustable stroke is ideal for machine changeovers, allowing you to fine-tune the 250-325 mm travel window without swapping the cylinder or bolting on external stops. For load-holding without continuous air pressure, consider an external rod lock or the SAIL series.
Because the 325 mm stroke exceeds 300 mm, an external guide rail is recommended to prevent excessive side-load on the 12 mm carbon steel rod. To replace an ISO 15552 cylinder, match the 32 mm bore, 325 mm stroke, 75 mm adjustment, PT port, and mounting interface. This unit lacks a magnet, so position sensing requires external switches rather than embedded CMSE or DMSE sensors.
Quick checklist
The rear adjuster screw allows you to shorten the effective stroke by up to 75 mm, creating a usable travel window between 250 and 325 mm. It functions as a mechanical stop to set the end position and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.