
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X35-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 35mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X35-20 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 15-35 mm, letting you shorten the nominal 35 mm stroke by up to 20 mm during machine setup.
Equipped with a 12 mm carbon steel rod and an M10x1.25 thread, this unit handles standard actuation duties while operating at speeds of 30-800 mm/s. The extruded aluminum barrel includes sensor grooves on both sides for mounting CMSE reed or DMSE electronic switches if a magnet is added later. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB and rear pivot options.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X35-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within the 15-35 mm window during machine commissioning to perfect pick-and-place hand-offs.
Quickly adapt the travel distance on a packaging line for different carton sizes without replacing the actuator.
Choose this 32 mm bore actuator when you need precise end-position tuning at commissioning without swapping the cylinder or bolting on external stops. If your application requires less push force, stepping down is not an option in the SAIJ range, but if you need substantially more thrust, the 40 mm bore provides 628 N at 0.5 MPa. Remember that the rear adjuster acts purely as a mechanical stop to set the travel end; it does not hold the load without live air pressure. For load-holding requirements, consider an external pilot-operated check valve or select the AirTAC SAIL or BSAI series.
This model is dimensionally interchangeable per ISO 15552 standards. The exact replacement configuration is a 32 mm bore, 35 mm stroke, up to 20 mm adjustment, PT tapered port threads, carbon steel rod, and no magnet. Because the stroke is under 300 mm, side-load concerns are minimal, but always ensure the load is guided on long unsupported travels.
Quick checklist
The rear adjusting screw acts as a mechanical stopper, allowing you to trim the effective travel back by up to 20 mm. For the SAIJ32X35-20, this creates an adjustable usable stroke window of 15-35 mm. It is not a lock; it only sets the travel end and requires live air to hold the load.
At 0.7 MPa, the push force increases to 563 N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.