
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X35-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 35mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X35-30 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 35 mm stroke that can be dialed back by up to 30 mm, giving you a highly flexible 5-35 mm usable travel window for precise end-position tuning.
This adjustable design eliminates the need to swap cylinders or bolt on external stops during machine setup. The extruded aluminum barrel features sensor grooves on both sides for direct mounting of CMSE reed or DMSE electronic switches, though this specific SKU is configured without a magnet. It uses a PT tapered port thread and a carbon steel piston rod for reliable daily operation.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X35-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end-stop distance within the 5-35 mm window during machine commissioning without adding external mechanical stops.
Quickly adapt the cylinder travel for different part sizes on a packaging line, using the rear screw to trim the stroke as needed.
The 30 mm adjustment range on this 35 mm stroke is exceptionally wide, making it perfect for prototyping or product-size changeovers where the exact end-stop distance must be dialed in by hand. Because the rear adjuster acts only as a travel stop and the air cushion manages deceleration, neither will hold a load without live air pressure. For dead-load holding, consider an external rod lock or the AirTAC SAIL series.
When matching an ISO 15552 replacement, verify the 32 mm bore, 35 mm stroke, 30 mm adjustment range, PT port thread, and standard carbon steel rod. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, deliberately omitting FB, CA, CB, and CR brackets.
Quick checklist
It features a rear adjusting screw that acts as a mechanical stopper, allowing you to shorten the effective stroke by up to 30 mm. This creates a usable travel window of 5 to 35 mm, which is set mechanically at commissioning rather than by pneumatic pressure.
If operated at 0.9 MPa, the push force increases to 724 N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.