
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X35-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 35mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X35-30-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. Because of the 30mm adjustment code on this 35mm nominal stroke, you gain a precise 5 to 35mm usable travel window for exact end-position tuning.
This compact bore uses a PT tapered G1/8 port and includes a magnet (-S) for direct compatibility with AirTAC CMSE reed and DMSE electronic sensors. The extruded aluminum barrel provides standard sensor grooves on both sides, while the rear stopper allows you to dial in the retract position without adding external stops.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X35-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 5 to 35mm retract distance for delicate pick-and-place operations without swapping out the entire actuator.
Quickly adapt end-stops on packaging lines when handling different product sizes, using the rear screw for rapid mechanical adjustments.
Apply up to 402N of clamping force in tight assembly fixtures, fine-tuning the travel to avoid crushing delicate components.
Choose this 32mm bore when an application demands highly specific short-stroke movements, as the 30mm adjuster lets you trim the 35mm stroke down to a 5mm minimum. If you need greater thrust, stepping up to the 40mm bore increases push force to 628N at 0.5 MPa. The SAIJ design is ideal for machine setups requiring variable end-stops during product changeovers, whereas a fixed SAI cylinder locks you into one exact dimension.
For an exact ISO 15552 replacement match, specify the 32mm bore, 35mm stroke, 30mm adjustment, PT port thread, and the -S magnet. Note that the rear adjuster acts only as a travel stop and does not hold the load without live air; for fail-safe load holding, consider an AirTAC SAIL or BSAI series cylinder.
Quick checklist
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective travel from the 35mm nominal stroke down to as little as 5mm, creating a 5 to 35mm usable window.
At 0.7 MPa, the push force increases to 563N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.