
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X350-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 350mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X350-10 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement.
Equipped with a 12 mm carbon steel rod and M10x1.25 thread, this unit handles standard operational loads while operating at speeds of 30-800 mm/s. It features PT tapered port threads (G1/8) and variable air cushions at both ends to manage deceleration. Note that the rear adjuster acts purely as a travel stop and does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X350-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the retract distance within a 340-350 mm window during machine commissioning to achieve perfect positioning without swapping cylinders.
Quickly adjust the stroke by up to 10 mm on packaging lines when handling slightly different product sizes, minimizing downtime.
Choose this 32 mm bore when an application requires precise end-position tuning during commissioning or product changeover, stepping up from smaller fixed-stroke units. If your setup demands more thrust than the 402N provided at 0.5 MPa, consider moving to a 40 mm bore which yields 628N. Conversely, if you need to secure the load mechanically without continuous air pressure, a standard SAIJ will not suffice; you should explore the SAIL (air-released lock) or BSAI (clamp-lock) variants instead.
Because this model has a 350 mm stroke, the unsupported rod length increases susceptibility to side-loading. Ensure you use an external guide to prevent premature seal wear. For a direct ISO 15552 replacement match, verify the 32 mm bore, 350 mm stroke, 10 mm adjustment, PT port thread, and your required mounting set (Basic, FA, LB, TC, FTC, TCM1, or TCM2).
Quick checklist
At 0.5 MPa, the push force is 402N and the pull force is 345N. At 0.7 MPa, the push force increases to 563N.
The rear adjuster screw allows you to shorten the effective 350 mm nominal stroke by up to 10 mm, providing a usable travel window of 340 to 350 mm. This stopper only sets the end position and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.