
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X350-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 350mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
It features a carbon steel piston rod and a PT tapered port thread. By integrating an external adjusting screw at the rear, this model allows you to shorten the effective stroke by up to 100 mm, creating a precise 250-350 mm usable travel window without changing the cylinder itself.
This adjuster functions strictly as a mechanical stop to set the retract end position and works alongside the standard variable air cushions at both ends. It is not a locking mechanism, meaning the cylinder cannot hold a load without live air pressure. For load-holding requirements, consider the SAIL or BSAI variants. The extruded aluminum barrel includes sensor grooves on both sides, ready to accept CMSE reed or DMSE electronic switches if a magnet is added later.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X350-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 250-350 mm travel window during product size changes without swapping cylinders or adding external mechanical stops.
Fine-tune the retract end position at commissioning to achieve precise alignment, utilizing the rear stopper screw for exact calibration.
Adjust the actuation length on the fly for conveyor routing arms that handle different package sizes within the 100 mm adjustment range.
If your application demands less force, stepping down is not an option in this size range, but if you need significantly more pull force, a 40 mm bore provides 528N. The adjustable stroke is favored over a fixed SAI cylinder when machine setups frequently vary, allowing you to dial in the exact 250-350 mm travel rather than machining external stops.
Because this cylinder features a 350 mm stroke, the 12 mm carbon steel rod is subjected to higher side-load risks when fully extended. An external guide is recommended to prevent rod binding and premature seal wear. As a dimensionally interchangeable ISO 15552 profile cylinder, it uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets. It operates efficiently at speeds between 30 and 800 mm/s.
Quick checklist
The rear adjuster screw acts as a mechanical stop, allowing you to trim the nominal 350 mm stroke back by up to 100 mm. This creates a usable travel window of 250-350 mm for fine-tuning end positions without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.