
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X350-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 350mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X350-100-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The integrated -S magnet supports position sensing via AirTAC CMSE reed and DMSE electronic switches.
This 32mm bore unit features a carbon steel rod with an M10x1.25 thread and PT tapered G1/8 ports. Because the 350 mm stroke is relatively long for this bore size, the rod end should be paired with an external guide to prevent excessive side-loading. The extruded aluminum barrel includes sensor grooves on both sides, and the rear adjuster functions purely as a travel stop, not a load-holding lock.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X350-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the retract end-stop during product size changes on a packaging line, adjusting the 250-350mm travel window without replacing the cylinder.
Dial in the exact retraction point for sensor triggering during assembly commissioning, using the 100mm adjustment range to perfect the stroke.
Handle extended travel operations while relying on an external guide to manage side loads on the M10x1.25 carbon steel rod.
Choose this adjustable-stroke model when your fixture requires exact end-position tuning or frequent product changeovers, eliminating the need to swap cylinders or bolt on external stops. For applications requiring true load-holding without live air pressure, a standard SAIJ will not suffice; consider an AirTAC SAIL pneumatic lock, BSAI clamp-lock, or an external pilot-operated check valve.
To match this exact ISO 15552 interchangeable replacement, configure the 32mm bore, 350mm stroke, 100mm adjustment range, PT G1/8 port thread, and the -S magnet option. It uses the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting the FB, CA, CB, and CR brackets. The variable air cushions at both ends provide 27mm of deceleration, but remember they only dampen travel, not hold the load.
Quick checklist
The rear adjusting screw acts as an external stopper, allowing you to shorten the effective stroke from its 350mm nominal length down to 250mm. This adjuster and the air cushions only decelerate the travel end; they do not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.