verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X350-30

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X350-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 350mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke350 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$83.97 $91.47Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X350-30

The AirTAC SAIJ32X350-30 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 320-350mm usable travel window, allowing you to dial back the 350mm nominal stroke by up to 30mm during commissioning.

This model features a 12mm carbon steel rod with an M10x1.25 thread and uses PT tapered G1/8 ports. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. The rear adjuster acts purely as a travel stop for deceleration and does not hold the load without live air pressure.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X350-30 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X350-30
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke350 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X350-30

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×350Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X350-30 Is Used

tune

End-Position Tuning

Fine-tune the retract end-position by up to 30mm during machine setup without swapping cylinders or adding external stops.

settings_input_component

Product Changeover

Quickly adjust the 320-350mm travel window to accommodate varying product sizes on a single production line.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X350-30 the Right Cylinder?

The adjustable stroke is selected over a fixed SAI when you need variable end-stops for product changeovers. To match this ISO 15552 cylinder, use a 32mm bore, 350mm stroke, 30mm adjustment, PT G1/8 port, and Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounts. At 350mm, the 12mm rod needs an external guide to prevent side-load wear.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X350-30 FAQ

It can deliver up to 724N at 0.9 MPa.

The rear adjuster screw acts as a mechanical stop, letting you shorten the effective stroke from 350mm down to 320mm. It only sets the travel end and does not lock the load without live air.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X350-30

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X350-30 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.