
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X350-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 350mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X350-30-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 350 mm stroke that can be fine-tuned down by up to 30 mm, giving you a precise 320-350 mm usable travel window during commissioning.
This extruded aluminum profile cylinder features a standard PT G1/8 port and a 12 mm carbon steel rod. The rear adjuster acts purely as a mechanical stop to set the retract end position and does not hold the load without continuous air pressure. For load-holding requirements without live air, consider the SAIL or BSAI series instead.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X350-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 320-350 mm retract end position rapidly when switching between product sizes on a packaging line.
Fine-tune the final resting position during commissioning without swapping out the entire cylinder.
Adjust the stroke length on the fly to accommodate different package widths on a sorting conveyor.
If your application requires less force, stepping down is not an option below 32 mm in this series, but stepping up to a 40 mm bore yields 628 N. The adjustable stroke is ideal for product changeovers, whereas a fixed-stroke SAI cylinder is better for dedicated single-purpose machines. To match this ISO 15552 replacement exactly, specify the 350 mm stroke, 30 mm adjustment, PT G1/8 port, and the -S magnet option.
Because this cylinder features a 350 mm stroke, the 12 mm rod requires external guidance to prevent excessive side-loading and premature seal wear. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting FB, CA, CB, and CR. The integrated magnet works seamlessly with AirTAC CMSE reed and DMSE electronic solid-state sensors.
Quick checklist
The maximum thrust is 82 kgf at 1.0 MPa.
The rear adjuster screw lets you shorten the effective stroke by up to 30 mm, creating a 320-350 mm travel window. It functions as a mechanical stop and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.