verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X350-40

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X350-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 350mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke350 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$83.97 $91.47Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X350-40

The AirTAC SAIJ32X350-40 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 310 to 350 mm usable travel window, allowing you to dial back the nominal stroke by up to 40 mm during commissioning.

This model features a 12 mm carbon steel rod and an M10x1.25 thread. The extruded aluminum barrel includes sensor grooves on both sides for CMSE or DMSE switches, though this base variant ships without a magnet. Mounting options are restricted to Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR brackets.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X350-40 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X350-40
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke350 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X350-40

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×350Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X350-40 Is Used

settings_input_component

Machine Setup Tuning

Dial in the exact 310 to 350 mm retract position during initial machine commissioning without swapping out the entire cylinder.

tune

Product Changeover

Quickly adapt the end-stop for different product sizes on a packaging line, trimming the stroke by up to 40 mm on the fly.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X350-40 the Right Cylinder?

If you need less force, dropping down to a smaller bore is advisable, while heavier loads demand stepping up to a 40 mm bore that yields 628 N. The adjustable stroke is selected over a fixed SAI cylinder when you need a variable end-stop to fine-tune the retract position without adding external stops.

Because the stroke is 350 mm, the 12 mm rod will experience leverage forces; an external guide is recommended to prevent side-loading damage. Note that the rear adjuster acts only as a travel stop and does not hold the load without live air—use an external rod lock or SAIL cylinder for fail-safe load holding. For an ISO 15552 replacement, match the 32 mm bore, 350 mm stroke, 40 mm adjustment, PT G1/8 port, and standard carbon steel rod.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X350-40 FAQ

The rear adjuster acts as a mechanical stop that lets you shorten the effective stroke from 350 mm down to 310 mm. It is used for fine-tuning end positions at commissioning but does not lock or hold the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X350-40

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X350-40 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.