
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X350-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 350mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X350-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster, designed to fine-tune end positions at commissioning. With a nominal 350mm stroke and a 50mm adjustment range, it provides a usable travel window of 300-350mm without needing external stops.
This 32mm bore profile cylinder integrates variable air cushions at both ends and features dual-side sensor grooves for CMSE or DMSE switches. The carbon steel piston rod has an M10x1.25 thread; while robust, an unsupported 350mm stroke warrants an external guide to prevent excessive side-loading.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X350-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 300-350mm travel window during product size transitions to set new retract endpoints without swapping the cylinder.
Fine-tune the final retract position during initial commissioning, eliminating the need to bolt on external mechanical stops.
Adjust the effective stroke on automated lines to accommodate varying material lengths or processing depths on the fly.
Choose this 32mm bore model when an application requires precise variable end-stops or frequent product changeovers, stepping up from a smaller bore if the 345N pull force at 0.5MPa is insufficient. If your fixture requires higher thrust, consider the 40mm bore variant which provides 528N of pull force. The rear adjuster acts solely as a travel stop for deceleration, not a lock, so load-holding without live air requires a SAIL or BSAI cylinder.
To match an ISO 15552 replacement, verify the 350mm stroke, 50mm adjustment, PT tapered port threads, and the standard carbon steel rod material. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options.
Quick checklist
The rear adjusting screw acts as a mechanical stop that lets you shorten the effective stroke by up to 50mm. For the SAIJ32X350-50, this creates a usable travel window between 300mm and 350mm, allowing precise end-position tuning without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.