
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X350-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 350mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X350-75 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 350 mm stroke that can be dialed back by up to 75 mm, giving you a usable travel window of 275-350 mm to perfectly tune the retract end position during commissioning.
This model features a carbon steel piston rod with an M10x1.25 thread, paired with a PT tapered G1/8 port. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement. Because the stroke extends to 350 mm on a 12 mm rod, an external guide is recommended to prevent excessive side-loading and premature seal wear.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X350-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance from 275 to 350 mm when switching between product sizes on the line, eliminating the need to swap out physical spacer blocks.
Set precise stopping points for diverter arms or gating mechanisms, allowing on-the-fly adjustments to accommodate varying package lengths.
Fine-tune the end-of-stroke position during initial commissioning to perfectly time tooling contact without adding external mechanical stops.
The 75 mm adjustment range is ideal for product changeovers, allowing you to shift the end-stop without swapping the cylinder or adding mechanical shims. For strokes of 350 mm or more, always support the load with an external linear guide to protect the rod.
This adjustable-stroke cylinder is dimensionally interchangeable per ISO 15552. It uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets. The rear adjuster acts strictly as a travel stop and does not hold the load without live air; for dead-load holding, use an external rod lock or a SAIL pneumatic lock cylinder. This SKU ships without a magnet; add the -S suffix if you require CMSE reed or DMSE electronic sensors.
Quick checklist
At the maximum rated pressure of 1.0 MPa, it can deliver up to 82 kgf.
The rear adjuster screw allows you to shorten the effective stroke by up to 75 mm. This turns the standard 350 mm stroke into a 275-350 mm adjustable travel window. The adjuster functions only as a mechanical stop for deceleration and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.