
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X350-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 350mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X350-75-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 350 mm stroke that can be dialed back by up to 75 mm, giving you a precise 275-350 mm usable travel window for product changeovers without swapping hardware.
This variant includes a magnet for position sensing and uses a carbon steel rod with an M10x1.25 thread. Because the 350 mm stroke is relatively long for a 32 mm bore, the piston rod should be guided externally to prevent excessive side-loading. The rear adjuster acts purely as a mechanical stop for end-position tuning and does not lock the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X350-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly dial in the 275-350 mm retract distance when switching between packaging sizes on a filling line.
Fine-tune the final end-stop during machine commissioning to perfect alignment without adding external shims.
Adjust the pusher travel on a sorting conveyor to handle different box lengths on the fly.
The adjustable 275-350 mm travel window is perfect for machines running multiple product sizes, allowing operators to fine-tune the retract end-position at commissioning rather than machining custom external stops. For fixed-travel applications without changeover needs, a standard SAI cylinder is sufficient.
When specifying a replacement, match the 32 mm bore, 350 mm nominal stroke, 75 mm adjustment range, PT tapered port thread, and the -S magnet option. The SAIJ series supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, omitting FB, CA, CB, and CR. Remember that the rear adjuster only sets the travel limit; for dead-load holding without air pressure, specify an SAIL locking cylinder or an external rod lock.
Quick checklist
At the maximum 1.0 MPa operating pressure, it delivers up to 82 kgf.
The rear adjuster screw allows you to shorten the effective stroke by up to 75 mm from the 350 mm nominal length, creating a 275-350 mm travel window. It functions as a mechanical stop and does not hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.