
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X375-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 375mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X375-10 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 365-375 mm usable travel window, allowing you to dial back the 375 mm nominal stroke by up to 10 mm during commissioning.
This bore 32 unit uses a G1/8 port and a 12 mm carbon steel rod with an M10x1.25 thread. The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic switches. The rear adjuster acts strictly as a travel stop for end-position tuning, not a load-holding lock.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X375-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 375 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×375 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 365-375 mm end position during initial commissioning without machining custom spacers.
Quickly adjust the retract stop by up to 10 mm on a packaging line when switching to a slightly shorter product format.
Choose this 32 mm bore adjustable-stroke cylinder when your setup requires precise end-position tuning without adding external stops or swapping the cylinder. Because the 375 mm stroke is relatively long for this bore size, an external guide is recommended to prevent excessive side-loading on the 12 mm rod.
For load-holding without live air pressure, this plain SAIJ is insufficient; consider the SAIL air-released lock or BSAI clamp-lock instead. To match this ISO 15552 replacement, verify the 375 mm stroke, 10 mm adjustment, PT tapered port thread, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Quick checklist
The rear adjuster screw lets you shorten the effective stroke from 375 mm down to 365 mm. It acts as a mechanical stop to fine-tune the end position at commissioning; it does not lock the load in place without air pressure.
The operating speed range is 30-800 mm/s, supported by a 27 mm air cushion at both ends to decelerate the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.