
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X375-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 375mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X375-100-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 375 mm stroke that can be fine-tuned down by up to 100 mm, creating a precise 275-375 mm usable travel window.
This variant includes a magnet for CMSE and DMSE sensors and uses a PT tapered port thread. The extruded aluminum barrel features sensor grooves on both sides. The rear adjuster acts strictly as a travel stop for deceleration and positioning, meaning it will not hold a load without continuous live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X375-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 375 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×375 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 275-375 mm travel window during format changes on packaging lines, avoiding mechanical rebuilds when product sizes vary.
Fine-tune the retract stop at commissioning to achieve exact positioning, compensating for mechanical tolerances without adding external stops.
Set variable ejection distances in automated assemblies, using the rear screw to modify the stroke based on specific component heights.
The 100 mm adjustment range is perfect for product changeovers, allowing you to shift the end-stop dynamically rather than installing fixed stops or reverting to a standard SAI cylinder. Because the nominal stroke is 375 mm, an external guide is recommended to prevent excessive side-loading on the 12 mm carbon steel rod. For load-holding without live air, consider the SAIL or BSAI series, as this adjuster is not a lock. Replacement requires matching the 32 mm bore, 375 mm stroke, 100 mm adjuster, PT port, and -S magnet to an ISO 15552 footprint.
Quick checklist
It features a rear adjusting screw that acts as a mechanical stop, allowing you to shorten the effective stroke by up to 100 mm. This provides a usable travel window of 275-375 mm, though it functions as a stop and not a load-holding lock.
At the maximum operating pressure of 1.0 MPa, the push force reaches 801 N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.