
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X375-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 375mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X375-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 365-375 mm usable travel window, allowing you to dial back the 375 mm nominal stroke by up to 10 mm during machine commissioning without adding external stops.
This variant features a carbon steel rod and PT tapered ports. The extruded aluminum barrel includes sensor grooves on both sides, and because this is the -S version, it includes a magnet ready for CMSE reed or DMSE electronic solid-state switches. The rear adjuster acts purely as a travel stop for end-position tuning and does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X375-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 375 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×375 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 365-375 mm travel window during machine setup to seat delicate parts accurately without swapping out the entire actuator.
Leverage the -S magnet and dual sensor grooves with DMSE solid-state switches to verify the adjusted end-of-stroke position in automated workflows.
If your process needs less force, dropping to a 20 mm bore reduces the footprint but sacrifices thrust; stepping up to a 40 mm bore yields 628 N at 0.5 MPa for heavier payloads. An adjustable stroke is ideal for product changeovers where a fixed-stroke SAI cylinder would require physical shimming or swapping.
Because the 375 mm stroke is relatively long for the 32 mm bore, an external guide is recommended to prevent rod side-loading and premature seal wear. This SKU is dimensionally interchangeable per ISO 15552 with a 32 mm bore, 375 mm stroke, 10 mm adjustment, PT G1/8 port, and a -S magnet. Remember that the rear adjuster is a stop, not a lock; for load-holding without live air, specify an SAIL or BSAI cylinder.
Quick checklist
The rear adjusting screw acts as an external stopper, allowing you to shorten the effective travel from 375 mm down to a minimum of 365 mm. It sets the end position but does not lock the load without continuous air pressure.
At the maximum operating pressure of 1.0 MPa, the push force reaches 82 kgf.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.