
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X375-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 375mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X375-20-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a carbon steel rod and a PT tapered port thread. Because this SKU carries the -S suffix, it includes a magnet for electronic DMSE or reed CMSE position sensing.
With a 375mm nominal stroke and a 20mm adjustment range, this model provides a usable travel window of 355-375mm. You can fine-tune the retract end-position at commissioning without swapping the cylinder or adding external stops. The rear adjuster acts purely as a travel stop and does not hold the load without live air pressure; for positive load-holding, consider an external rod lock or the AirTAC SAIL series.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X375-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 375 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×375 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 355-375mm travel window during format changes without physically swapping the cylinder or adding external hard stops.
Fine-tune the retract position of a 32mm bore diverter gate to accommodate varying package sizes on the fly.
Use the 20mm rear adjuster to precisely set the machine's end-position during initial commissioning, absorbing mechanical tolerances.
The adjustable stroke is ideal for product-size changeovers on a line, letting you dial in the exact end-stop without machining new hard stops. This SAIJ model uses the reduced SAIJ mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR brackets.
At 375mm of stroke, the 12mm diameter rod and M10x1.25 thread will experience amplified side loads if the tooling is unsupported. An external guide rail is highly recommended to prevent rod binding and premature seal wear over this long travel distance.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
The rear adjuster screw allows you to shorten the effective stroke by up to 20mm, providing an adjustable travel window of 355-375mm from the 375mm nominal stroke. The adjuster acts as a travel stop and does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.