
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X375-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 375mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X375-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 345 to 375 mm, allowing you to dial back the nominal 375 mm stroke by up to 30 mm during commissioning.
The rear adjuster acts strictly as a travel stop for end-position tuning, not a load-holding lock. For position holding without live air pressure, consider the SAIL or BSAI series. This model uses an extruded aluminum barrel with sensor grooves on both sides, accepting CMSE reed and DMSE electronic switches if a magnet is added later.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X375-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 375 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×375 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 345-375 mm travel window during initial machine build to perfectly time the end-of-stroke position without adding external stopper blocks.
Quickly adjust the retract stop on packaging lines when handling different carton lengths, using the rear screw to shift the effective stroke by up to 30 mm.
Dial in exact end positions for light-duty pressing or locating tasks, relying on the 12 mm rod to handle moderate loads within the 30-800 mm/s speed range.
If your setup needs higher thrust, stepping up to the 40 mm bore yields 628 N at the same pressure. The adjustable stroke prevents the need to swap cylinders or bolt on external stops for fine-tuning.
Because the 375 mm stroke is relatively long for a 32 mm bore, an external guide is recommended to handle side loads and prevent rod deflection. This model supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options. It operates at speeds of 30-800 mm/s.
Quick checklist
The rear adjuster screw allows you to shorten the effective stroke from 375 mm down to as little as 345 mm. This provides a 30 mm tuning window for precise end-position setup without replacing the cylinder.
At 0.7 MPa, the push force increases to 563 N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.