
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X375-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 375mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X375-30-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a usable travel window of 345 to 375 mm, allowing you to dial back the nominal stroke by up to 30 mm during commissioning. The integrated -S magnet enables position detection across the dual sensor grooves using CMSE reed or DMSE electronic solid-state switches.
This model features a carbon steel piston rod with an M10x1.25 thread and a G1/8 port. Because the 375 mm stroke is relatively long for a 32 mm bore, the rod diameter should be factored into your design—long unsupported strokes require an external guide to prevent excessive side loading. The rear stopper acts solely as a travel end-point deceleration device and does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X375-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 375 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×375 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 345-375 mm end-stop during product size transitions without physically replacing the cylinder on the line.
Fine-tune the retract stroke by up to 30 mm at commissioning to perfect the seating distance of delicate workpieces.
Modify the ejection travel window on a conveyor sorting system to accommodate varying package depths on the fly.
Choose this adjustable-stroke model when you need precise end-position tuning or rapid machine changeovers without swapping out the entire cylinder or adding external stops. If your application requires less force, stepping down is an option, but if you need to hold a load securely without continuous air pressure, this cylinder is not suitable—the adjuster is a stop, not a lock. For static holding, consider the SAIL or BSAI series, or use an external rod lock.
When matching ISO 15552 interchangeability, verify the 32 mm bore, 375 mm nominal stroke, 30 mm adjustment range, PT tapered port thread, and the -S magnet option. The mounting interface supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 accessories (omitting FB, CA, CB, and CR). Given the 375 mm stroke, always incorporate an external guide to manage side-load stresses on the M10x1.25 rod.
Quick checklist
The maximum thrust is 82 kgf at 1.0 MPa.
The rear adjuster allows you to shorten the effective travel from the 375 mm nominal stroke down to 345 mm. It functions as an end-stop and works alongside the variable air cushions, but it does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.