
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X375-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 375mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X375-40-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a carbon steel piston rod and a built-in magnet (-S) for position sensing with CMSE reed and DMSE electronic switches. By turning the external stopper screw at the rear, you can shorten the effective travel, creating a usable stroke window of 335-375 mm for this 375 mm nominal length.
The rear adjuster acts purely as a travel stop to set the end position and does not lock or hold the load without live air pressure. For load-holding requirements, an external pilot-operated check valve or a related SAIL lock cylinder is required.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X375-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 375 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×375 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract end-position within the 335-375 mm window during machine commissioning without machining new hard stops.
Quickly adjust the stroke up to 40 mm to accommodate varying package sizes or material lengths on a packaging line.
Fine-tune the pressing or positioning depth on automated assembly fixtures using the rear stopper screw.
Choose this adjustable-stroke model when your machine setup requires fine end-position tuning at commissioning or frequent product-size changeovers, allowing you to dial back the stroke by up to 40 mm without swapping cylinders or adding external stops.
Because the 375 mm stroke is relatively long for the 12 mm rod diameter, an external guide is recommended to prevent excessive side-loading and rod deflection. This SAIJ unit uses a PT tapered port thread, accepts a G1/8 air connection, and supports the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) omitting FB, CA, CB and CR brackets. It is dimensionally interchangeable per ISO 15552.
Quick checklist
The rear adjuster screw acts as an external stopper that lets you shorten the 375 mm nominal stroke by up to 40 mm, providing a usable travel window of 335-375 mm. It sets the end position but does not lock the load without live air pressure.
At the maximum 1.0 MPa pressure, it delivers up to 82 kgf.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.