
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X375-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 375mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X375-50 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 375 mm stroke that can be fine-tuned backward by up to 50 mm, yielding a usable travel window of 325-375 mm.
Because the stroke extends past 300 mm, the 12 mm carbon steel rod and M10x1.25 thread will need external guidance to prevent excessive side-loading. The adjuster acts purely as a mechanical stop for end-position tuning and does not hold the load without live air. It features an extruded aluminum barrel with sensor grooves on both sides, though a magnet is not included on this standard configuration.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X375-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 375 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×375 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 325-375 mm travel window on packaging lines to accommodate different carton sizes without adding external stopper blocks.
Fine-tune the retract end position during commissioning to perfectly align a 375 mm stroke pick-and-place operation.
Choose this 32 mm bore when you need precise end-position tuning without swapping cylinders during product changeovers. Conversely, if you need to secure the load mechanically without continuous air pressure, the SAIJ adjuster cannot serve as a lock; consider the SAIL or BSAI series instead.
For an exact ISO 15552 replacement, match the 32 mm bore, 375 mm stroke, 50 mm adjustment range, PT tapered port thread, and carbon steel rod. Mounting is limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2 options. Given the 375 mm length, ensure your setup includes an external guide to handle side loads.
Quick checklist
At the maximum operating pressure of 1.0 MPa, it delivers up to 82 kgf.
The rear adjuster screw allows you to shorten the effective travel from the nominal 375 mm down to 325 mm. It functions as a travel stop for end-position tuning and is not a locking mechanism.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.