
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X375-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 375mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X375-50-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The integrated magnet (-S) supports CMSE reed and DMSE electronic sensors housed within the dual-side extruded aluminum barrel grooves.
Because the 375 mm stroke is relatively long for a 32 mm bore, the 12 mm carbon steel rod and M10x1.25 thread require careful alignment to prevent excessive side-loading. The rear adjuster acts purely as a mechanical stop for end-position tuning and relies on the variable air cushions for deceleration; it does not lock the load without continuous air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X375-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 375 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×375 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 325-375 mm travel window during line format changes to accommodate different package sizes without changing hardware.
Fine-tune the retract stop during machine commissioning to perfect seating pressure against delicate workpieces.
Act as an adjustable physical stop for lightweight pallets or routing gates, allowing on-the-fly stroke adjustments.
Choose this adjustable-stroke model when your application requires variable end-stops or frequent product changeovers without physically swapping the cylinder. If your setup demands higher thrust, stepping up to a 40 mm bore increases push force to 628 N at 0.5 MPa. For load-holding without live air pressure, note that this rear adjuster is a travel stop, not a lock; you would need an external pilot-operated check valve or a related SAIL pneumatic lock cylinder.
To match this exact ISO 15552 interchangeable replacement, specify: 32 mm bore, 375 mm stroke, 50 mm adjustment range, PT tapered port threads, standard carbon steel rod, and the -S magnet option. Given the 375 mm stroke, ensure an external guide supports the load to minimize deflection on the 12 mm rod. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 82 kgf.
The rear adjuster screw lets you shorten the 375 mm nominal stroke by up to 50 mm, providing a usable travel range of 325-375 mm. It functions as a mechanical stop for position tuning and is not a locking device.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.