
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X40-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 40mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X40-20 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 40 mm stroke that can be fine-tuned down by 20 mm, creating a usable travel window of 20 to 40 mm.
This 32 mm bore actuator features a 12 mm carbon steel rod, G1/8 PT port, and variable air cushions at both ends. The rear adjuster acts purely as a travel stop for commissioning flexibility, not a load-holding lock. For position retention without live air pressure, consider the SAIL or BSAI series instead.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X40-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in exact retract distances down to a 20 mm stroke for delicate pick-and-place operations without machining new hard stops.
Quickly adapt end-of-stroke positions on packaging lines when switching between product sizes, minimizing downtime.
Fine-tune pressing or clamping endpoints during initial commissioning to accommodate mechanical tolerances in the fixture.
Select this 32 mm bore cylinder when an application demands on-the-fly end-stop adjustments within a tight 20-40 mm travel range. The SAIJ32X40-20 is chosen over a fixed SAI cylinder when product changeovers necessitate dialing in the retract position without swapping hardware.
To guarantee a true ISO 15552 replacement match, confirm the 40 mm stroke, 20 mm adjustment range, PT threaded port, and your required mounting style. The SAIJ series supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR brackets. Since this model lacks the -S magnet option, it cannot host CMSE or DMSE sensors.
Quick checklist
The rear adjuster screw allows you to shorten the 40 mm nominal stroke by up to 20 mm, providing a usable travel window of 20 to 40 mm. This stopper fine-tunes the end position but does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.