
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X40-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 40mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X40-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. With a nominal stroke of 40 mm and a 30 mm adjustment range, it provides a usable travel window of 10 to 40 mm. This allows operators to dial in the exact end position during commissioning without swapping out the cylinder.
The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting, though this non-magnet version requires a -S suffix to use AirTAC CMSE reed or DMSE electronic sensors. The carbon steel rod has an M10x1.25 thread, and the rear adjuster acts purely as a mechanical stop to set the retract position. It does not lock or hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X40-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly retune the retract end-stop on a packaging line when switching to a different carton size.
Dial in the exact 10 to 40 mm travel distance during machine setup to perfect sensor alignment.
Fine-tune the final approach position of a small pneumatic probe without adding external shims.
Choose this 32 mm bore adjustable-stroke cylinder when your machine setup requires variable end stops or frequent product changeovers. If you need more thrust, stepping up to a 40 mm bore increases push force to 628 N at 0.5 MPa. For applications requiring exact repeatable fixed travel without tuning, the standard SAI cylinder is a simpler alternative.
This SAIJ32X40-30 configuration features a PT tapered port thread, carbon steel rod, and no magnet. It supports a mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2. Because the adjuster is a stop and not a lock, use a SAIL or BSAI cylinder if you need fail-safe load holding without continuous air pressure.
Quick checklist
The rear adjuster screw lets you mechanically shorten the stroke by up to 30 mm. This creates a usable travel window of 10 to 40 mm, allowing you to set the exact retract end position without changing the cylinder.
At 0.9 MPa, the push force increases to 724 N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.